So Bad It's Good FoRuM
https://sbig.dead-donkey.com/

Ripping/encoding/releasing Q & A
https://sbig.dead-donkey.com/viewtopic.php?f=31&t=1189		 Page 124 of 126
Author:  Pure [ Mon Oct 20, 2008 10:18 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
:haha: Then it's good that I didn't search the thread manually :lol:
I doubt there's something that does that all automaticly but then again I personally haven't used the above script. Maybe Rogue knows more, or gx, and I think maybe BadBugs used something aswell. But anyway I think manikbr already gave up on it :shh:

:cheer:
Author:  telmoMRC [ Tue Oct 21, 2008 12:18 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
better but not perfect have some halo or something like that ^^

Image

^^ ^^
Author:  elguaxo [ Tue Oct 21, 2008 12:23 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
That's not a halo, its a blended field. Be a man and post your script! :pooper:
Author:  telmoMRC [ Tue Oct 21, 2008 12:33 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A 
mpeg2source("I:\drporno\paldvdx.d2v")

Yadif(order=0,mode=1)
srestore()

crop(38,86,656,404)

Spline36Resize(704,400)

mc_spuds(frames=2,strength=3)
a=last
a. SeeSaw(NRlimit=3, NRlimit2=4, Sstr=1.5, Slimit=6, Spower=5, Sdamplo=9, Szp=15, sootheT=30)
Author:  elguaxo [ Tue Oct 21, 2008 1:10 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
I'll take a look tomorrow to see how to improve srestore's blend detection! :pooper:
Author:  telmoMRC [ Tue Oct 21, 2008 6:08 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
are something i can understand this is the info dvd 

Anamorphic Widescreen 
1.77:1
PAL 
itu-r bt.470-2


so in this case i will select in the GK Pal Anamorphic (16:9) and resolucion 704x400 but if i do that the rip have very bad AR :beh:

and if i select in the GK Pal Nom Anamorphic (4:3) and resolucion 704x400 the dvd have good AR

i am confuse whit this dvd :grrr: :grrr:
Author:  elguaxo [ Tue Oct 21, 2008 6:14 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Fuck the info telmo. The AR is inside of the DVD itself, not on its cover, IMDb or some info. The AR reported by the info might be right, but why trust it when you can find it out yourself.

Read the GK guide, everything is in there: http://forum.dead-donkey.com/viewtopic.php?f=2&t=15117

:bang:
Author:  telmoMRC [ Tue Oct 21, 2008 6:39 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
bad info :censored: :censored:

yeahh this is the right info

Image

all the dvd sites said that shit is Pal Anamorphic (16:9) :ere: after wall is 4.3 ^^

thx again don?t forget to check the sample :wha: :wha: :cheer:
Author:  Antikor [ Wed Oct 22, 2008 12:40 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
I want to try fft3dfilter and another one in my scripts but i have some errors.

FFTW3.dll and fft3dfilter.dll are in same folder.

Which lines or dll missing?

Image Image

And i need to MVDegrain2 and 3.How can i use these?I cant find any dll for these.

Thx people.
Author:  cuub [ Wed Oct 22, 2008 12:56 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Do you have mvtools?

In order to use fft3dfilter you have to put this dll in your system32 folder.

:!
Author:  Antikor [ Wed Oct 22, 2008 1:28 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Thx cuub.I solved.I put that dll into AviSynthPlugins but now i put into system32 folder and solved.

What about mvdegrain2 and 3, how can i use them?
Author:  elchupacabra [ Wed Oct 22, 2008 3:31 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
MVDegrain seems to be a part of an MVTools collection: http://avisynth.org.ru/mvtools/mvtools.html
Author:  elguaxo [ Wed Oct 22, 2008 3:35 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Antikor wrote:
What about mvdegrain2 and 3, how can i use them?


search this thread, there are tons of samples: viewtopic.php?p=64759#p64759

:pooper:
Author:  Antikor [ Thu Oct 23, 2008 2:51 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
It works.Thx.
Author:  cuub [ Thu Oct 23, 2008 3:47 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
I want to downgrade my ac3 track... currently it has a 640 kb/s bitrate. What codec and settings do you recommend? :pooper:
Author:  elguaxo [ Thu Oct 23, 2008 3:57 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Any other tracks available? Best option would be DTS HD to let's say 384 or 448 AC3. You need eac3to, which uses aften for AC3 encoding.

Depending of the codec of the source eac3to on its own doesn't fully support everything, for example TrueHD or DTS HD (it recognizes the plain DTS part of a DTS HD track, but not the HD one). If you have Nero and Arcsoft, then eac3to supports everything. If you just need to reencode AC3 @ 640 to 448 or lower, then you just need eac3to.

http://forum.doom9.org/showthread.php?t=125966
Author:  cuub [ Thu Oct 23, 2008 4:03 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Only another LPCM track...
Author:  elguaxo [ Thu Oct 23, 2008 4:07 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
LPCM is lossless and eac3to supports it. Use that!
Author:  manikbr [ Tue Oct 28, 2008 2:20 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Still trying London Conspiracy (1976), I think I got better results now:

Image

Image

Image

Image

Finally, I think I got it. What do you think?

:cheer:
Author:  elguaxo [ Tue Oct 28, 2008 2:29 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Post your current script. I think you could use some deblocking at the beginning of the script.
Author:  manikbr [ Tue Oct 28, 2008 4:33 am ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Ok, here it goes:

Code:
#  SOURCE
mpeg2source("E:\Documents and Settings\MANiK\Meus documentos\Gordian Knot\VTS_01_1.d2v")

#  TRIM
#trim(startframe,endframe)

#  IVTC
#Telecide(order=1,guide=1).Decimate()
#  or use
#IVTC(44,11,95)
#GreedyHMA(1,0,4,0,0,0,0,0)

#  DEINTERLACING (1)
#FieldDeinterlace()
#FieldDeinterlace(blend=false)
#TomsMoComp(1,5,1)

#  DEINTERLACING (2)
#KernelDeInt(order=1,sharp=true)
#  or maybe
#DGBob(order=1,mode=0)

#  DEINTERLACING (3) - special requests
#GreedyHMA(1,0,0,0,0,0,0,0)
#Telecide()
#SeparateFields()

#  CROPPING
crop(8,0,700,476)

#  SUBTITLES
#VobSub("FileName")

#  RESIZING
LanczosResize(624,464)

#  DENOISING: choose one combination (or none)
Undot()

#  1) little noise
#Temporalsoften(2,3,3,mode=2,scenechange=6)
#mergechroma(blur(1.3))
#FluxSmoothST(5,7)

#  2) medium noise
#Temporalsoften(3,5,5,mode=2,scenechange=10)
#Convolution3d("moviehq")
#FluxSmoothST(7,7)

#  3) heavy noise
#Temporalsoften(4,8,8,mode=2,scenechange=10)
#Convolution3d("movielq")
#FluxSmoothST(10,15)

#  BORDERS
#AddBorders(left,top,right,bottom)

#  COMPRESSIBILITY CHECK
#  !!!!Snip Size now has to be 14 for use in GKnot!
#SelectRangeEvery(280,14)

#  FOOL CCEnc
#empty = BlankClip()
#AudioDub(last,empty)
Author:  elchupacabra [ Tue Oct 28, 2008 7:52 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
It could be my monitor, but it looks like that black is not dark enough.

You should play around with ColorYUV imho. ;) See "7.2.9.1 The Basics (brightness/contrast/saturation)" here: http://www.doom9.org/index.html?/captur ... synth.html
Author:  Pure [ Tue Oct 28, 2008 8:36 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Looking purely at the first screen I would say that the black is black enough. But it never hurts to fuck around a bit more :cheer:
Author:  manikbr [ Tue Oct 28, 2008 9:06 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
elchupacabra, thank you very much for this link mate. Tonight when I get home, I will read this..

And thank you all guys for the tips. :cheer:
Author:  manikbr [ Tue Oct 28, 2008 9:14 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Pure, just forgot one thing: I've downloaded the nfo softwares you suggested me and tonight I will try to make a decent nfo.. ^^
Author:  Pure [ Tue Oct 28, 2008 9:19 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
:good: pm me if you need to know something :D
Author:  cuub [ Tue Oct 28, 2008 9:38 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Pure is the master on that! :ere:
Author:  ^Rogue^ [ Wed Oct 29, 2008 8:28 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Which deinterlacer is en vogue for interlaced PAL these days? Last time I needed one I used Leakkerneldeint and was pleased with the result. But since it's been a while I figured I might give a newer one a shot. :)
Author:  elguaxo [ Wed Oct 29, 2008 8:35 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
Ultimate deinterlacing combo:

For TFF Clips:
Interp = nnedi(field=1)
TDeint(order=1,field=1,type=1,edeint=Interp,emask=TMM(order=1,field=1))

For BFF Clips:
Interp = nnedi(field=0)
TDeint(order=0,field=0,type=1,edeint=Interp,emask=TMM(order=0,field=0))

you'll need
NNEDI: http://forum.doom9.org/showthread.php?t=129953
TDeint & TMM: http://forum.doom9.org/showthread.php?t=82264

--

A very fast and good quality deinterlacer is Yadif: http://forum.doom9.org/showthread.php?t=124284
You must import the DLL using Load_Stdcall_Plugin

:pooper:
Author:  ^Rogue^ [ Wed Oct 29, 2008 9:04 pm ]
Post subject:  Re: Ripping/encoding/releasing Q & A
:bisou: Thanks.

I'm yours, take me please. :bow: :stretch:
Page 124 of 126 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
https://www.phpbb.com/