So Bad It's Good FoRuM https://sbig.dead-donkey.com/ |
|
Ripping/encoding/releasing Q & A Prt. III https://sbig.dead-donkey.com/viewtopic.php?f=31&t=17215 |
Page 36 of 37 |
Author: | junkboy [ Wed Jan 29, 2014 10:01 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Try http://www.sendspace.com/ |
Author: | ^Rogue^ [ Thu Jan 30, 2014 12:14 am ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Thanks, I'll try and find a nice crappy sequence to upload tomorrow. |
Author: | ^Rogue^ [ Fri Jan 31, 2014 5:01 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Here come the samples: http://www.sendspace.com/file/tumaiv Pass: sbig |
Author: | ^Rogue^ [ Fri Jan 31, 2014 5:06 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
It's interlaced PAL. Every deinterlacer I've tried gives me blended frames. These produce them at all the scenechanges as well as everywhere else: Code: Interp = nnedi(field=0) TDeint(order=0,field=0,type=1,edeint=Interp,emask=TMM(order=0,field=0)) Code: yadif(order=0) Code: LeakKernelDeint(order=0) With this the scenechanges are ok, the rest isn't. Also I have these crappy moire-like disturbances (check the car...): Code: SeparateFields() Bob() SelectEven() It's been a while since I've had to deinterlace PAL and I have no idea how to fix this. |
Author: | junkboy [ Fri Jan 31, 2014 7:33 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
That's an NTSC->PAL blend conversion. 'Bout the best you can do is with... yadif(mode=1,order1) srestore() You'll need to replace yadif with a much better bobber for the encode. I'd be tempted to use qtgmc. |
Author: | ^Rogue^ [ Fri Jan 31, 2014 7:45 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Never used it, in fact I don't even have it. I'll try and set iz up. Can you help me with the settings of the bob function? |
Author: | junkboy [ Fri Jan 31, 2014 8:40 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Never used qtgmc? You probably don't want/need the latest mod, so get QTGMC 3.33. If you're struggling with the required plugins, grab the Plugins Package: http://forum.doom9.org/showthread.php?t=156028 This is what I ran on the samples: qtgmc(noiseprocess=1,grainrestore=1,sigma=2,noisedeint="generate",stabilizenoise=true,sharpness=0.5) srestore() Only downside is that it's as slow as christmas. |
Author: | max_cady [ Fri Jan 31, 2014 8:51 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
http://www.multiupload.nl/0LSBVM2VW8 I have blocking problem. And don't like my results. Don't want loose all of detail. http://www.multiupload.nl/0LSBVM2VW8 Some of my tries: Code: vinverse() Code: vinverse() fft3dfilter(sigma=6,sigma2=2.51,sigma3=1.51,sigma4=1,bw=16,bh=16,ow=8,oh=8,bt=1) Code: smdegrain(tr=1, prefilter=deblock_qed) Code: Deblock_QED() Good to see you jb! |
Author: | ^Rogue^ [ Fri Jan 31, 2014 8:53 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Thanks, you are a gentleman and a scholar, sir. Don't worry about speed. I got a dual Xeon system I can unleash on the motherfucker. |
Author: | ^Rogue^ [ Fri Jan 31, 2014 9:03 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
JB, do you know if this works with the 's' versions of the plugins, as in repairs and removegrains? Those are the only ones that work reliably on all my machines... |
Author: | junkboy [ Fri Jan 31, 2014 10:28 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
^Rogue^ wrote: JB, do you know if this works with the 's' versions of the plugins, as in repairs and removegrains? Those are the only ones that work reliably on all my machines... Sorry, no idea, I'm using the recommended SSE2 versions. max_cady wrote: I have blocking problem. And don't like my results. Don't want loose all of detail. Try this... Code: qtgmc(sourcematch=2,tr2=2) merge(selecteven(),selectodd()) Play around with qtgmc's settings, it can prolly be bettered. |
Author: | ^Rogue^ [ Fri Jan 31, 2014 11:39 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
OK, thanks. I'll get on it as soon as I have time (for some likely troubleshooting). Implementing new filters/scripts always tends to be a pain in the ass. |
Author: | junkboy [ Sat Feb 01, 2014 4:24 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Just tried it, and RemoveGrainS looks to work okay. |
Author: | ^Rogue^ [ Sat Feb 01, 2014 11:15 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Good to know, I won't get around to it until tomorrow. |
Author: | ^Rogue^ [ Sun Feb 02, 2014 2:07 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
After much tinkering I got it working. For some reasons, my rig refuses to load eedi3.dll but it seems to be working without it. It's encoding now. |
Author: | junkboy [ Sun Feb 02, 2014 2:44 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Yeah, you only need eedi3 if you want to use it to do the interpolation (eg. edimode="eedi3"). The default used is nnedi3. |
Author: | ^Rogue^ [ Sun Feb 02, 2014 6:03 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Lucky me. |
Author: | ^Rogue^ [ Tue Feb 04, 2014 1:22 am ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Worked like a charm, thank you again. Out of curiosity I made a second encode with yadif as bobber and HOLY CRAP! - QTGMC is definitely worth the extra encoding time. |
Author: | max_cady [ Tue Feb 11, 2014 9:15 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Thank you jb! SORRY FOR LATE ANSWER. |
Author: | TrimYourBush [ Sat Mar 08, 2014 12:18 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
It seems that PassThePopcorn really hates ShitBusters, as shown by the following comment made by the queen bee of trumping at that place about telmo's encode of Body Snatchers: Quote: You can trump it, it's a horrible encode. Albeit not from a DVD source, ShitBusters do their Blu-ray 576p's anamorphically (Blu-ray is not an anamorphic source), usually at the wrong PAR, which results in the encode having a slightly higher resolution than 576p. Meanwhile they give a golden popcorn status to a 576p (non anamorphic, obviously) with 7878 Kbps of video bitrate... That place is becoming placebo pathetic really quickly. |
Author: | ^Rogue^ [ Sat Mar 08, 2014 2:06 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Wasn't even aware the place existed. |
Author: | max_cady [ Sat Mar 08, 2014 5:12 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Not welcome anamorphic 576p's there. In that logic dont encode blurays.Keep them 1080p. Shitty Handbrake rips takes golden popcorn but many proper release deleting and many more stupidness. But it's great tracker. ^Rogue^ wrote: Wasn't even aware the place existed. |
Author: | junkboy [ Sat Mar 08, 2014 9:15 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
A couple of days on PTP was enough for me. |
Author: | ^Rogue^ [ Sat Mar 08, 2014 11:54 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Is the place open or invite only? |
Author: | junkboy [ Sun Mar 09, 2014 9:06 am ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
viewtopic.php?f=31&t=18178 |
Author: | ^Rogue^ [ Sun Mar 09, 2014 4:01 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Author: | ^Rogue^ [ Mon Mar 31, 2014 11:25 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Hey JB, can you take a look atanother sample for me? I want to encode the Spawn animated series (HBO) and can't IVTC it properly. |
Author: | junkboy [ Tue Apr 01, 2014 8:37 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
I think that's what max_cady tried to encode... http://doom10.org/index.php?topic=2428.0 |
Author: | ^Rogue^ [ Tue Apr 01, 2014 10:02 pm ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
Fuck, right... What a crappy source. Since I have no idea how to use yatta, I guess it's off. Shame, I even bought the fucking DVDs. |
Author: | junkboy [ Sat Apr 05, 2014 10:26 am ] |
Post subject: | Re: Ripping/encoding/releasing Q & A Prt. III |
You don't have to use YATTA. I grabbed the first disc and looked at the first 2 episodes, and during the intro/s there's a fade out from 23.976 fps to 17.982 fps(?) and back to 23.976 fps which has me stumped, but other than that and a couple of blended sections that couldn't be deblended, everything else can be fixed in avisynth. It'll be very tedious and time-consuming work though. |
Page 36 of 37 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group https://www.phpbb.com/ |